Feed type | Mechanical/Pneumatic |
Press stroke | 40 or 30 mm (1.57“ or 1.18“) |
Cross section range | 0.08 – 10 mm 2 (28 – 7 AWG) |
Crimp height adjustment (wire & insulation) | Increment: 0.025 mm (0.001”) Max.: 2.0 mm |
Terminal pitch range | Min.: 1 mm (0.04”) Max.: 28 mm (1.10”) |
Terminal thickness | < 1,2mm (<0,047")) |
Weight | 4kg (8,6 lbs.) |
Feed System | Reer Feed(End Feed) |
Important note | SEDEKE recommends that wire samples be submitted in cases where there is doubt as to the processing capabilities of a particular machine. |