When using automatic wire stripping machines, common problems are usually related to improper operation, inaccurate parameter settings or adjustments, and other reasons. The following is a summary of common problems and solutions when using automatic wire stripping machines.
Inaccurate stripping length
Problem: The length of the stripped wire does not meet the set value, resulting in mismatched wiring or stripped parts are too short/too long.
Solution:
Check the setting parameter: check whether the parameter setting of wire stripping length is correct and whether the correct value is entered.
Recalibrate the machine: Calibrate the automatic wire stripping machine regularly.
Check cable specifications: Make sure that the cable used meets the specifications of the machine.
Incomplete stripping or core damage
Problem manifestation: When the wire stripping machine strips the wire, the outer jacket is not completely removed, resulting in incomplete exposure of the wire, or resulting in damage to the inner core.
Solution:
Adjust the tool depth: Adjust the tool depth according to the outer skin thickness of the cable to avoid too shallow or too deep.
Check tool condition: check the sharpness and condition of the tool, replace or sharpen the tool in time.
Check the feeding accuracy: make sure the cable is correctly aligned with the feeding port of the machine to avoid deviation leading to incomplete peeling.
Automatic wire stripping machine jamming or clogging
Problem performance: cable jammed in the feeding process or the machine is clogged, affecting productivity.
Solution:
Check the feeding device: make sure the feeding mechanism is free of dust, oil or other substances that affect the smooth feeding.
Clean the equipment regularly: clean the dust and debris inside the machine to avoid jamming.
Adjust the feeding speed: adjust the feeding speed appropriately to avoid jamming caused by too fast feeding.
Stripping speed instability
Problem performance: the working speed of the wire stripping machine is unstable, resulting in low efficiency or unstable quality of stripping.
Solution:
Check the electrical system: check whether the electrical system of the machine is normal and whether the power supply is stable.
Adjust the parameters: adjust the operating parameters of the wire stripping machine to ensure the balance of speed and efficiency.
Check machine parts: check the machine parts to see if the speed is unstable due to looseness or wear.
Inaccurate cable feeding
Problem Performance: The cable does not enter the feeding slot correctly, resulting in inaccurate stripping position or uneven stripping.
Solution:
Adjust the feed alignment: Make sure the cable is correctly aligned with the feed opening to avoid skewing.
Check the feeding conveyor system: Check whether the feeding wheel, fixture or guiding device is working properly to ensure that the cable passes through smoothly.